That is the song that played over and over in my head as we patched the hole in the driveway. It was actually more of a divot or a trench caused by the local borough paving the road higher than my garage. This then caused my car to scrape every time I pulled into the garage - a TERRIBLE sound!!
We thought we'd need to pay an asphalt contractor to come and pave the area for us but then we heard of coldpatch! (There are many varieties available. The product we chose did a good job but since I do not have a comparison I will not endorse a specific product.)
This option turned out to be a fairly cheap alternative to using a contractor and it was a simple quick evening DIY project - about 1 hour start to finish!
Before you begin you want to make sure the pothole or area to be leveled is clear of debris as best you can. Now you're ready to patch!
Step 1: Use an asphalt crack filler to create a bonding layer. It's a thick liquid that needs to be spread out across the entire area you're patching. Make sure to use an old broom or chip brush - you'll never use it again once the crack filler dries!
Step 2: Empty a bag of coldpatch onto your area. It's an interesting consistency, but low odor and no dust!
Step 3: Rake the coldpatch out.
Step 4: Once the coldpatch is spread out you will need to pound it down. This helps fill in any gaps and also help solidify the patch. (Depending on the size of your patch you may consider checking to see if it is level before moving onto Step 5.)
Step 5: Drive over the patch several times. You can drive over the patch as soon as you're finished so we figured that would be a great way to ensure the coldpatch is pounded down well.
The patch has held up well, we had rainy days, sunny days and freezing temperatures...it survived it all!
I couldn't believe how easy and inexpensive this project was.
Our "hole" was about 3' X 2', which seemed large when we started thinking about this option. Now that we've done it, I'd consider doing an even larger area!
Linked to:
That it interesting. We have some cracks where the road meets our driveway. I am not sure if we were going to just try to asphalt over them or if we need to patch them like this. I will have to remember this when the time comes.
ReplyDelete